Akwa Ibom State Government has abandoned multi-million naira printing press equipment procured by immediate past governor Godswill Obot Akpabio for the state-owned newspaper corporation -The Pioneer.
The Trumpet investigation reveals that the equipment worth $1.5m was imported from Germany for the Daily Operations of the state-owned newspaper.
But the state government led by Governor Udom Emmanuel had abandoned the printing press 7 years into its administration.
The Printing Press which consist of a Supra Setter A105 otherwise known as Computer To Plate (CTP) machine and a Goss Community Press with a web offset press, said to have been worth over $1.5 million then, was meant to be operated by the Akwa Ibom Newspaper Corporation (AKNC), publishers of the Pioneer Newspapers.
It was learnt that the web offset press had the capacity to print 17 colour pages, 32 black and white pages of newspaper and runs 500,000 impressions per hour, while the CTP runs a resolution of 2,400 DPI.
Our Correspondent gathered that the printing press would have saved the state huge printing cost as well as served as a commercial printing press for both national and local newspapers among others.
Findings revealed that some National Dailies had already indicated interest to print their newspapers at the press especially as it would enhance circulation and early arrival of the papers in the South South region.
Unfortunately, the machines which were installed and commissioned on May 28, 2015, but were not tested, as they didn’t print any copy of the Pioneer on the day it was test-run by the experts brought in to manage the press, have been lying fallow, while the complex housing them have remained locked.
When our Correspondent visited the printing press, it was discovered that the machines have not worked since the day it was commissioned by Akpabio, even as the government is yet to officially hand over the press to the management of the state-owned newspaper corporation.
Former General Manager of Pioneer Newspaper, Mr Silas Udo, who was in office when the press was installed told our Correspondent that the machines were not used by the Pioneer to print any paper, nor, was any member of staff trained on how to operate the machines.
He explained that the Akwa Ibom Newspaper Corporation did not officially receive the printing press as it was never handed over to the Corporation by the supervising ministry, the Ministry of Information and Strategy.
According to him, the procedural process of receiving the machines was not done because the necessary checklist to ascertain what the state government paid for, and what was sent by the manufacturers was not done.
“The press was never used to print the PIONEER in my time. No Pioneer staff under my watch went for training anywhere to master the workings of the Press.
“Yes, we did not receive the press. It was a deliberate decision not to receive it as the procedural processes were not done or seen to be done. For example, the checklist to ascertain what the government paid for, and what was sent by the manufacturers was not done.
“It would therefore have been against civil service procedure to sign a Stores Receipt Voucher (SRV). So unless this was done after I left service, the Press remained under the administration of the supervising Ministry,” he stated.
Confirming the position of Silas, Mr Idorenyin Umoren, the Production Manager of AKNC then, said he was one of the committee members of AKNC Rotary Press Pre-Shipment Inspection Committee announced by the state government to visit Goss Community Press Company in Germany.
Umoren however stated that the committee was not inaugurated, and the inspection of the Goss Community Press Company in Germany, Heidelberg, never happened.
He said they were only informed that the machines have arrived in Uyo through Onne in Port Harcourt, Rivers State, and they were expected to receive them, saying no production staff of AKNC was trained on how to operate the machines.
Meanwhile, Mr Patrick Usen, the Consultant who handled the project blamed the Ministry of Information for the failure of the project and called for a probe into the abandonment of the printing press.
Usen explained that the machines failed to work due to improper installation, saying the managers of the project did not follow the procedures necessary to set up a press.
He revealed that if the machines were properly commissioned, the representatives of Heidelberg, Goss Graphics and himself, who facilitated the process from the purchase and shipment of the machines would have been available at the installation and commissioning.
He questioned how the machines were received, saying there was no confirmation of what was received vis-a-vis what was sent, adding that the auxiliary equipment which came with the machines such as forklifts and rollers are among other equipment for the smooth running of the machines were missing.
“Governor Godswill Akpabio had excellent intentions for the State and Pioneer Newspaper. Unfortunately, the Ministry of Information truncated that project. They should be held responsible. I don’t know where this enquiry will end, but I think that a Commission of Enquiry should be set up to probe the issue.
“That web offset press has not been received till today by Pioneer, that is, it has not been officially handed over by Goss Graphics to Pioneer because of the haphazard installation procedures. There was no adherence to good engineering practice of installation. They hurriedly put that up together and called the Governor, and I think the machine collapsed and failed there.
“There was no ink, no rolling papers, no printing plate needed to print for the Governor to see. All those things were not there, and the machine collapsed that day,” he stated.
The Consultant called for a technical audit of what was supplied, what was installed, and how it was installed, as well as possible errors with the installation processes to correct the abnormality that has kept the machines from working.
He lamented that the state government was yet to pay him his contract fee for the project, adding that he was willing to return for a proper installation of the machines if the government was willing.
He however warned that the Supra Setter A105 (Computer to Plate) machine may have to be upgraded as it may have outlived its lifespan of six years while laying idle.
“There must be a technical audit of what was supplied, what was installed, how it was installed and also find out if there were errors with the procedures of installation and realign the machine to start all over again.
“The lifespan of the Goss Graphics could be up to 50 years, but the Computer to Plate would last, let’s say for between five to six years. All you need is to change parts and upgrade,” he advised.
Efforts to speak with Mr Aniekan Umana, who was then the Commissioner for Information that supervised the procurement process was unsuccessful as he did not pick up his calls, nor responded to text messages sent to his phone.
Plans by the state government in the past to engage a Consultant to manage the press were unsuccessful after the immediate past Commissioner of Information and Strategy, Mr Charles Udo visited the place and promised to take the issue of the printing press to the attention of Governor Udom Emmanuel.
In a telephone interview, the state commissioner of Information and Strategy, Comrade Ini Ememobong assured that the state government will soon hand over the printing press to a consultant.
“When I came into the office, I visited the facility and commissioned an enquiry into issues surrounding the press, we are working to reconcile all grey areas. In line with the Governor’s determination to continue to achieve results in a most cost effective way, we had to open up the business to private investors who would come and manage the press.”
“Many have indicated interest and we are still considering the options. I assure you that before the exit of this administration, the press will be taken over for proper management.” Comrade Ini Ememobong, Hon. Commissioner for Information and Strategy said.