Skip to main content
ADVERTISEMENT

Gombe Assembly Complex Collapse: COREN Clears Design, Blames Construction Procedures

Make The Trumpet part of your daily experience.Follow us on Google News

By Obah Sylva

The Gombe Assembly Complex collapse was linked to construction procedures and temporary support arrangements rather than structural design or material defects, according to findings by the Council for the Regulation of Engineering in Nigeria (COREN).

ADVERTISEMENT

The engineering regulator said its investigation found the consulting structural engineer qualified and the structural design checked and sealed. Tests showed that the concrete and reinforcement materials met specified requirements, while temporary formwork and construction sequencing were identified as probable contributing factors in the July 24, 2026 collapse.

Key Highlights

  • COREN released findings into the Gombe Assembly Complex collapse.
  • The council did not attribute the collapse to structural design or material deficiencies.
  • Temporary formwork and the construction sequence were identified as probable contributing factors.
  • The canopy was reportedly cast in one operation instead of progressively in stages.
  • One worker died and seven others were injured in the July collapse.
  • Construction may continue under enhanced supervision and stricter professional requirements.

COREN Explains Cause of Gombe Assembly Complex Collapse

According to COREN National Registrar Okorie Austin Uche, the investigation examined the structural drawings, reinforcement details, concrete test results, formwork arrangements and construction sequence.

The collapse occurred on July 24 while fresh concrete was being placed on the reinforced-concrete cantilever entrance canopy. COREN said its panel found that the consulting structural engineer was qualified and that the structural design had been checked and sealed.

The council said tests showed that the concrete had adequate compressive strength and that the reinforcement bars were consistent with the sizes specified in the structural drawings. Integrity tests on the standing structure after the collapse also indicated that it remained technically adequate.

Temporary Formwork Identified as Probable Factor

Rather than blaming the structural design, COREN identified the temporary formwork and the sequence in which concrete was placed as probable contributing factors.

The panel found that the canopy was cast in one operation rather than progressively in stages. According to the investigation, this placed substantial demands on the temporary support system while fresh concrete was being placed.

COREN described the temporary formwork as a critical part of the load-bearing system during construction. The finding puts attention on construction methodology and site supervision, while the investigation also noted that the working drawings had not received approval from the relevant authority.

Contractor Failed to Engage Full Team of Registered Professionals

COREN also raised concerns about the professional personnel engaged on the project. The council said the contractor had failed to engage all required registered professionals, including engineers and architects.

The investigation further found that the engineer’s site representative was an unregistered graduate, while the working drawings had not received approval from the relevant approval authority. These findings have increased attention on professional supervision and regulatory compliance in major public construction projects.

One Worker Killed, Seven Injured

The collapse occurred while construction work was ongoing, resulting in the death of one worker and injuries to seven others. Following the incident, the Gombe State Government ordered an investigation.

Earlier reports identified the incident as a major safety concern and prompted calls from built-environment professionals for a comprehensive technical audit. COREN later constituted an investigative panel, which reviewed project documents and technical aspects of the construction before submitting its findings to the state government.

 

Gombe Government Accepts COREN Recommendations

Gombe State Deputy Governor Manassah Jatau received the COREN report on behalf of the state government and pledged to implement its recommendations.

Jatau said the government was not prepared to sacrifice quality and safety for speed in completing the Assembly complex. He confirmed that the contractor could continue work, but only with enhanced supervision and the involvement of qualified, registered professionals.

He said lessons from the incident would be used to strengthen quality control, professional oversight and compliance with engineering standards across government projects in the state.

Read also:

Construction to Resume Under Stricter Oversight

With COREN’s findings submitted, work on the Gombe State House of Assembly Complex can proceed subject to recommended corrective measures. The council’s assessment has shifted attention from the structural design itself to construction practices, temporary support systems, professional registration and site supervision.

COREN has also continued to emphasise stronger engineering regulation and safety standards amid wider concerns about structural failures in Nigeria. The council recently partnered with other professional and research bodies on efforts to address engineering failures and improve safety.

Implementation of the recommendations will determine whether the identified construction and supervision weaknesses are adequately addressed before the project progresses further. Follow us on X for more updates.

Obah Sylva

Obah Sylva

Obah Sylva is the Editor-in-Chief of The Trumpet Newspaper, where he leads the newsroom’s editorial direction, its coverage of Delta State and the Niger Delta, and its public-service reporting on recruitment, government schemes and payments. He built The Trumpet’s live trackers, its news hubs for all 36 states and the FCT, and the #DeltaDecides2027 election results project, and led the newsroom’s move to AI-assisted publishing and search-led growth, which roughly quadrupled the site’s traffic. A journalist and SEO specialist, he holds a postgraduate qualification in Investigative Journalism from the International Institute of Journalism, an MBA from the University of Abuja, a BSc in Industrial Chemistry from the University of Benin and an associate qualification in Software Engineering from ALX. He is a member of the Nigerian Institute of Journalists and the Nigerian Institute of Management (NIM).

Next Post